Why a Pulse Load Test? In today's electronics, battery performance is very important. The MBT series computes the battery's actual remaining power capacity using a 2 second pulse load test. This pulse load simulates the real power demand of a electronic device. Battery performance is measured, not just voltage.

The ZTS Multi-Battery Tester (MBT-1) provides a comprehensive means of testing the state of charge or state of power for more than 30 battery types. This microprocessor-controlled instrument is designed for commercial or home use and tests popular primary (non-rechargeable) and rechargeable batteries using a patented, high accuracy pulse load test. After a fully automatic test cycle, percentage of remaining battery capacity is indicated on the LED bar display. Battery types are clearly labeled next to appropriate contacts. Negative test lead/probe conveniently stores in seam at side. It's easy to use (no switches or settings), and test results are easy to understand. Tests NiMH, Li-Ion, alkaline, lithium, coin cell, button type and more. Uses 4AA batteries (not included).

Features

Easy to use - no switches or settings

Know how much power is left in your batteries

Patented high accuracy Pulse Load Test

Great for electronics, remotes, photo, smoke detectors, games, medical, and more

Made in U.S.A.

Tests

• 3.6v Li-Ion rechargeable [RCR123A, 18500, 17650, 18650]
• 1.5v button cell [S76, A76, A625, A640]
• 1.2v NiMH/NiCd rechargeable [AA, AAA, C, D]
• 1.5v lithium [AA L91, AAA L92]
• 3v lithium coin [1616, 1620, 2016, 2025, 2320, 2032, 2430, 2450, 58L 1/3N]
• 6v 28 series [28A, S28, 28L]
• 3v photo lithium [CR123, CR2, CRV3]
• 1.5v alkaline [AA, AAA, C, D, N]
• 12v alkaline [A23]
• 9v alkaline, carbon zinc
• 8" x 4.5" x 1.25"
• Six LEDs - Green, yellow, and red